Characterization of Clay Bricks Surface Deformation Behavior through Digital Image Analysis

Handmade compacted clay bricks are an important integral building material especially for the low cost durable and affordable housing segment. Characterisation of physical, mechanical and deformation behavior of handmade clay bricks is essential to ensure material integrity and durability. In this paper, physical and mechanical properties are determined and the Particle Image Velocimetry (PIV) method is used to assess deformation behavior of bricks under uniaxial compressive loading. The bricks exhibit brittle failure with high strain localized along the cracks. The initiation and development of cracks on loading redistribute compressive strain within the brick with some regions experiencing minimum strain at failure. The relatively large displacements between cracks account for relatively large failure strain for the brittle bricks. A good concurrence is established between the strain assessment based on uniaxial compressive test and on image correlation using the PIV method. The average vector magnitude derived from PIV measurements, correlate well with the engineering strain and can thus be used for strain estimation in handmade clay bricks. Keywords: clay brick, Digital Image Correlation, deformation, particle image velocimetry, characterisation

Evaluating the Impact of Nitrogen Fertilization Treatments and Irrigation on Soil Health Indicators in a Long-Term Crop Rotation Research Plot

Abstract Many agriculturalists have been focusing on the most efficient farming method that would produce the maximum yield while still sustaining the soil ecosystem. Soil samples were collected from the “Old Rotation” area (Auburn University, Auburn, AL), and were assessed for soil biochemical, chemical and biological characteristics related to soil quality. Treatments of the experimental site were a control with no legumes or N fertilizer; cotton every year with winter legumes; a 3-yr cotton-corn-soybean rotation with wheat and winter legumes; and cotton every year with N fertilizer. Impacts of irrigation were also tested between the sites. Assays were performed measuring phosphomonoesterase and phosphodiesterase activity, soil organic carbon, soil pH, and microbial diversity. The 3-year and winter legume rotations showed significant differences in the structure and membership of microbial communities and differences in biochemical activity. These results further demonstrate the ability of crop rotation to enhance the soil health of agricultural ecosystems. Keywords: Nitrogen Fertilization, Irrigation, Crop Rotation, Soil Ecology, Enzymatic Activit

Site‐specific plans for the More Milk in Tanzania project, Tanga region

Irish Ai

Fabrication, Characterization and Deformation Behavior of a New Acrylate Copolymer-based Nonwoven Structure

A method of fabricating nonwoven structure from dry-laid cotton fibers and atomized acrylate copolymer is presented. The method based on a consolidation pressure of about 2kPa and room temperature curing, is used to produce structures with fiber mass to binder volume ratio (FBR) of 0.7, 0.5, 1, 1.5, 2 and 3. Structurally stable structures are produced and characterized in terms of their bursting strength, areal density, water absorption, and monotonic deformation behavior. At constant FBR, the bursting strength and areal density of the structures increases with the fiber mass. The structures’ water absorption capacity reduces with the increase in the volume of binder applied. At FBR of 1 and area density of 295 grams per square meter, the structure’s load-strain curve is characterized by a linear and non-linear behavior corresponding to elastic and inelastic strain, respectively. At peak loads, the structure’s deformation is relatively uniform but becomes localized as the failure point is approached. A good correspondence is established between the strain assessment based on uniaxial tensile test and on image correlation using Particle Image Velocimetry (PIV) method. The average vector magnitude derived from PIV measurement, correlate well with the engineering strain and can thus be used for strain estimation. Keywords: Nonwoven, Dry-laid, Deformation, Particle Image Velocimetry, acrylate copolyme

Site‐specific plans for the More Milk in Tanzania project, Morogoro region

Irish Ai

Voices of Youth, Parents, and Stakeholders: Findings From Case Studies in the YouthSave Project

Voices of Youth, Parents, and Stakeholders: Findings From Case Studies in the YouthSave Projec

Effect of dietary replacement of fishmeal by insect meal on growth performance, blood profiles and economics of growing pigs in Kenya

Open Access JournalPig production is one of the fastest growing livestock sectors. Development of this sector is hampered by rapidly increasing costs of fishmeal (FM), which is a common protein source in animal feeds. Here, we explored the potential of substituting FM with black soldier fly larval meal (BSFLM) on growth and blood parameters of pigs as well as economic aspects. At weaning, 40 hybrid pigs, i.e., crossbreeds of purebred Large White and Landrace were randomly assigned to five iso-nitrogenous and iso-energetic dietary treatments: Control (0% BSFLM and 100% FM (T0)), and FM replaced at 25% (T25), 50% (T50), 75% (T75) and 100% (T100) with BSFLM. Average daily feed intake (ADFI), average daily gain (ADG), body weight gain (BWG) and feed conversion ratio (FCR) were calculated for the whole trial. Hematological and serum biochemical parameters, the cost–benefit ratio (CBR) and return on investment (RoI) were evaluated. No significant effect of diet type was observed on feed intake and daily weight gain. Red or white blood cell indices did not differ among diets. Pigs fed T25, T75 and T100, had lower platelet counts compared to T0 and T50. Dietary inclusion of BSFLM did not affect blood total cholesterol, triglycerides, low-density lipoprotein and high-density lipoprotein. CBR and RoI were similar for the various diets. In conclusion, BSFLM is a suitable and cost-effective alternative to fishmeal in feed for growing pigs